Ozidi

Server Status uknown Ozidi Server number 50860

I agree and I was equally surprised that I couldn't find the default settings easily. I did notice recently that if you go into launching/hosting a game locally that you can click a button and see the default settings. However it doesn't address everything and i'm not entirely certain they are exactly what is given in a PVE Official. It might be a good place to start though. Just go into host/launch and then click the Ark Rules button on the top of the left panel. I think that will be at least close... Good Luck.

Ryan, How about giving us the default values for everything in the descriptions for each setting? I think it would be helpful when resetting a server to understand the default values for each setting. I'm thinking specifically about dino damage, resistance, adds when putting points in etc. But also experience would be helpful for those of us changing the custom engram numbers and lvls. Just a thought. Thanks!

I was able to locate these values from a previous server i had configured. If anyone needs them the defaults were as follows... PerLevelStatsMultiplier_Player[0]=1.00 PerLevelStatsMultiplier_Player[1]=1.00 PerLevelStatsMultiplier_Player[2]=1.00 PerLevelStatsMultiplier_Player[3]=1.00 PerLevelStatsMultiplier_Player[4]=1.00 PerLevelStatsMultiplier_Player[5]=1.00 PerLevelStatsMultiplier_Player[6]=1.00 PerLevelStatsMultiplier_Player[7]=1.00 PerLevelStatsMultiplier_Player[8]=1.00 PerLevelStatsMultiplier_Player[9]=1.00 PerLevelStatsMultiplier_Player[10]=1.00 PerLevelStatsMultiplier_Player[11]=1.00 PerLevelStatsMultiplier_DinoTamed[0]=0.15 PerLevelStatsMultiplier_DinoTamed[1]=1.00 PerLevelStatsMultiplier_DinoTamed[2]=1.00 PerLevelStatsMultiplier_DinoTamed[3]=1.00 PerLevelStatsMultiplier_DinoTamed[4]=1.00 PerLevelStatsMultiplier_DinoTamed[5]=1.00 PerLevelStatsMultiplier_DinoTamed[6]=1.00 PerLevelStatsMultiplier_DinoTamed[7]=1.00 PerLevelStatsMultiplier_DinoTamed[8]=0.15 PerLevelStatsMultiplier_DinoTamed[9]=2.00 PerLevelStatsMultiplier_DinoTamed[10]=1.00 PerLevelStatsMultiplier_DinoTamed[11]=1.00 PerLevelStatsMultiplier_DinoTamed_Add[0]=0.38 PerLevelStatsMultiplier_DinoTamed_Add[8]=0.38 PerLevelStatsMultiplier_DinoTamed_Affinity[0]=0.15 PerLevelStatsMultiplier_DinoTamed_Affinity[8]=0.15 PerLevelStatsMultiplier_DinoWild[0]=1.00 PerLevelStatsMultiplier_DinoWild[1]=1.00 PerLevelStatsMultiplier_DinoWild[2]=1.00 PerLevelStatsMultiplier_DinoWild[3]=1.00 PerLevelStatsMultiplier_DinoWild[4]=1.00 PerLevelStatsMultiplier_DinoWild[5]=1.00 PerLevelStatsMultiplier_DinoWild[6]=1.00 PerLevelStatsMultiplier_DinoWild[7]=1.00 PerLevelStatsMultiplier_DinoWild[8]=1.00 PerLevelStatsMultiplier_DinoWild[9]=1.00 PerLevelStatsMultiplier_DinoWild[10]=1.00 PerLevelStatsMultiplier_DinoWild[11]=1.00

No. I"m talking about that box on the server screen that shows Custom Launch Parameters and then has a box with a ? that you can click.

Sure thing...So my custom launch parameters I had to do a bit of looking at. When you click custom launch parameters on your server screen you will see a list of things you need to enable there depending on what you are doing. You can literally cut and paste what is listed above for the correct map and add that to your launch parameters. Mine looks like this.... TheIsland?Multihome=x.x.x.x?Port=xxxxx?QueryPort=xxxxx?SessionName=xxx?MaxPlayers=10?listen?ServerPassword=xxx?ServerAdminPassword=xxx?RCONEnabled=True?RCONPort=18217?AltSaveDirectoryName=xxxx?OverrideOfficialDifficulty=5.0?ShowFloatingDamageText=true?AllowAnyoneBabyImprintCuddle=true?GameModIDs=731604991,656525905,630601751,751991809,554678442,538827119,821530042 Thats really it. As you can see i'm giving you my entire launch parameters that i use for my modded server with several mods on it. You obviously need to replace the x's with the values for your server but it should be pretty simple. All of this to say you really just need that one line of code in your launch parameters to get this done easily. ShowFloatingDamageText=True? The ? lets you execute the command and then input another command. Thus the reason for no ? at the end after i list my mods....because the line of commands is done. hopefully that all makes sense. Survival Servers does a great job giving you the rest of the code you need in their custom launch parameters window. I suggest you use that for the map you want to use. it should contain your specific values and thus the x's are taken care of.

I use these. MatingIntervalMultiplier=0.45 EggHatchSpeedMultiplier=30 BabyMatureSpeedMultiplier=40 BabyImprintingStatScaleMultiplier=1.000000 BabyCuddleIntervalMultiplier=0.050000 BabyCuddleGracePeriodMultiplier=1.000000 BabyCuddleLoseImprintQualitySpeedMultiplier=0.000000 Seems reasonable for a quetz or giga in terms of time.

Because of the new UI several mods are out of date and need updating. I've noticed when accessing inventory on specific mods there is significant lag and occasionally i will crash. I suspect its just due to the new UI.

I made it work by adding it to custom launch parameters.

Hello all, So I had a server that reached pretty much the end. We killed all the bosses and basically won Ark. However we wanted to start over. Because we were a smaller tribe we increased several settings to accommodate for the need for increased damage in order to take down the bosses. Now i'm about to start a new play through and I wanted to ensure we had the default values back. However try as I might i cannot seem to find the correct values for all the stats. For example I have found all the stat increases for both player and tamed dinos are all set to 1. There is also a set of multipliers for tamed dino health and tamed dino damage. I am guessing those are not 1. probably something like .15. Does anyone have all the default values or is there an easy way to reset my server to default values? Thanks!

oooh nice toy! I'll be using that. Thank you!

Or you could just put this in your custom launch parameters... ShowFloatingDamageText=true?

GAME SERVER ID #27676 Game server 27676 is showing unknown. Support Ticket Opened #455166